| INSTALLATION (STEP 1 AND 2)
|
|
 |
 |
| STEP 1. Release the pin by turning the security lock half pulled to maintain tension on the pin. |
STEP 2. Pull the pin while carefully inserting it in the junction spiral of the conveyor belt. |
|
TO REWIND THE PIN, IF NECESSARY (STEP 3) |
|
 |
 |
| STEP 3. Lift the latch and turn the mobile section counter clockwise using the handle or crossbar model. |
|
|
ATTENTION Never turn the moving section of the reel clockwise, for it may tangle the pintle pin. |
|
Advantages
 |
|
Each one of our pintle wires are individually labeled for easy identification, quality control and tracking purposes. These labels indicate the description of the pintle wire as well as the date ordered and purchase order number. With this information we can track the entire production process of each pintle wire we manufacture.
|
| INSTALLATION (STEP 1,2,3 AND 4)
|
|
 |
 |
| STEP 1. Undo the blue twist tie holding the spool to the metal wire, remove the label and retie the twist tie in order to support the monofilament to the spool. |
|
|
|
|
 |
 |
| STEP 2. Undo the white twist ties. |
STEP 3. Remove the red twist tie indicating the beginning of the metal wire (be careful while unwinding the wire leader). |
|
|
|
 |
 |
| STEP 4. Insert the wire leader into the spirals, up to the opposite extremity. Remove the blue twist tie, insert a pencil in the hole of the spool and pull on the wire in order to only leave the monofilament in place. Cut the wire and tie the monofilament to the conveyor belt. |
|
|
ATTENTION In order to avoid injuries, handle the unwinding wire leader with care once the red twist tie has been removed. Further, a movement too sharp in manual insertion may damage the tip of the pintle pin. |
|
Reviews
There are no reviews yet.